Commercial insulation in Cañon City CO - a building shell built to your plans
Shop too hot in summer and cold in winter, or a new building headed for plan review? We insulate it to your plans.
- Fully licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
What does commercial insulation in Cañon City involve?
Commercial insulation in Cañon City means insulating the walls and roof of a shop, office or metal building so it's easier to heat and cool, and that insulated shell is part of what the city checks when it reviews a commercial project.
Most of the business owners who call me have either a new building or addition headed for the city's plan review, or an existing shop that's drafty and costly to heat, sometimes with old insulation that needs insulation removal first. The price turns on the size of the building, whether it's metal or framed, which system goes in, how much has to come out or be fixed first and whether foam needs a covering layer over it. The schedule turns mostly on plan review and where the building is in construction, so we handle any permit the work needs before we start and fit our crew in around the other trades. The estimate tells you what we'll do, where and why, so you can see where the money goes.
How we do commercial insulation
We start from your plans, because on a commercial job the insulation has to match the shell the design team drew, and getting that settled early saves everyone a second trip through review. Before anything goes in, we deal with what has to come first, like wet spots, old wiring, gas appliances near where foam would go, or old insulation that's soaked or full of droppings and has to come out. Then our crew preps and protects the space, installs the system the plans call for, keeps the coverage as deep at the edges as in the middle, seals around pipes and openings so the insulation isn't fighting a draft, and cleans up when it's done.
Some buildings need moisture handled alongside the insulation. If an office sits over a crawl space, we can put down a crawl space vapor barrier so ground moisture doesn't soak the new material, and where walls or ceilings need protection from damp inside air, we take care of the vapor barrier installation as part of the same job.
Spray foam for metal and pole buildings
Closed-cell foam, a dense foam that also blocks moisture, suits bare metal walls and roofs because it seals air and insulates in one pass and usually stops the panels from sweating. It costs more than loose fill or batts, so we use it where the building actually needs that seal.
Air sealing with blown-in or batts for framed buildings
Framed offices and shops with an attic usually do best with air sealing, closing the gaps first, then blown-in insulation, loose fill blown through a hose, or batts on top. It's the cheaper route and usually the better one, unless the ductwork runs through that space, and then foam starts to earn its cost.
Call before your plans go in for review, not after, because changing the insulation on approved plans is slower than getting it right the first time.
What happens when you call about commercial insulation in Cañon City?
I handle the looking and the estimate myself, and our own crew does the install. Here's how a commercial job usually runs from the first call to the final walk-through.
Call or send the form
Call (719) 204-8345 or use the form, and tell us the building type, what insulation is in it now and whether you have plans. That way I show up with the right questions.
I look at the building
I come out myself to look at the walls, roof, attic or crawl space and go over your plans. I note anything that has to be fixed before we start, like wet spots or old wiring.
You get a written estimate
The estimate says what we'll do, where and why, so you can see exactly what you're paying for and compare it line by line. We also sort out any permit the work needs with the right office for your address.
Our crew installs, I check
Our own crew does the work once the permit side is settled. When they're done, I walk the building with you before we call it finished.
Get a written estimate for your building's insulation
We reply within one business day to set a time. I come out, look at the building and your plans, and give you a free written estimate on site, with no obligation.
(719) 204-8345Commercial insulation permits and plan review in Cañon City
Commercial insulation here goes through two offices. The Cañon City Building Department issues the building permit, and a third-party Commercial Plan Reviewer handles every commercial plan review for the city, including the energy review that looks at the insulated shell. We check which office covers your address, handle the permit side before work starts and make sure what we install matches what the reviewer approved, so the inspection isn't where the surprises show up.
Insulation here has to work in both seasons, because the city's energy design values plan for a 5 degree F winter and a 94 degree F summer. We see the same mix of metal shops and framed offices on jobs around Cañon City, where we're based, and in Pueblo West and the other cities nearby.
Commercial insulation questions from Cañon City building owners
Which energy code path should my commercial project follow in Cañon City?
Your design team picks one, either the 2018 IECC or ASHRAE 90.1-2016, and the city won't let you combine the two. They choose early and show the insulated shell for that path on the plans, and we install to match whichever one they picked.
Does spray foam insulation need a covering in a commercial building?
According to one maker's guide, yes. It says that to meet code, spray foam has to be separated from the building's interior by a thermal barrier, a protective layer, or an approved alternative assembly, so check that any spray foam quote includes that barrier layer, ours included.
What is the best way to insulate a metal building in Cañon City?
It depends on the building, but filled cavity systems, which pack insulation into the hollow space in the walls and roof, are worth asking about. One trade group says they're quickly becoming a necessity to meet stricter energy codes, and insulating a metal building also cuts a lot of noise from outside and inside. I'll tell you whether one suits your building once I've seen it.
How much does commercial insulation cost in Cañon City?
There's no set price until I've seen the building and your plans, and the written estimate gives you the number for your job. Size, the system and how much prep the building needs move it most. Budget separately for the commercial review fees, which you pay directly to the third-party plan reviewer, not to us.
How do I check that an insulation contractor is licensed in Cañon City?
Look them up on the Building Department's list of licensed contractors, which the city updates once a month. Anyone contracting for pay in Cañon City needs a city general or trade contractor license from the Building Official, renewed every year. We're fully licensed and insured.
How do I get my building ready for an insulation estimate?
Have the building type, what insulation is in it now and any plans you already have ready when you call. For new work, the city's energy review asks for complete plans and specifications, design conditions that fit the local climate and the method used to design the shell with its calculations, so the further along those are, the more exact our estimate can be.
Vapor barrier work that goes with insulation
If an office or shop sits over a crawl space, a barrier on the dirt keeps ground moisture from creeping up into the floor insulation and framing above.
Damp air finding its way into walls or ceilings can wet insulation from the inside, so a properly placed barrier keeps the new material dry and working.
Get your commercial insulation estimate started
Call (719) 204-8345 any day from 7 AM to 10 PM, email info@canoncitysprayfoaminsulation.com or use the form, so I can see the building before your design team locks in the insulation.